5060i Intensifier Pump
The OHP 5060i is a 50 HP intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) ith flow rates up to3.76 liters (1 gallons) per minute for the various cutting.
Standard Features:
- See-through top cover
- Dual pressure control
- High oil temperature sensor
- Low pressure inlet water sensor
- High pressure safety dump valve
- 0.53 gallon (2 liter) high pressure attenuator with 1.45 micron filtration
- Automatic safety pressure bleed-down valve
- High efficiency heat exchanger
- Economy, reliability, and maintenance friendliness
Specifications:
- Intensification Ratio: 20:1
- Number of Intensifiers: one
- Max Pressure: 60,000 psi (4,130 bar)
- Operating Pressure: 55,000 psi (3,800 bar)
- Flow Rate: 3.76 lpm (1 gpm)
- Power: 50 HP
- Dimension: 1680 × 840 × 1440 mm (661.5" × 331" × 567")
- Weight: 1150 kg / 2,535 lbs
Short Block, Intensifier
Max Pressure: 4,130 bar / 60,000 psi |
Attenuator
Max Pressure: 4,130 bar / 60,000 psi
Volume: 2 Litre |
|
|
|
