OMAX® 2626 JetMachining® Center
Smaller work envelope: Compact size,
precision abrasivejet machining of smaller parts.
The model 2626 jetMachining Center cuts complex parts out of most materials including metal, plastic, ceramics and composites - directly from a CAD drawing or .Dxf file.
JetMachining is ideal for short-run part production, just-in-time manufacturing, tooling, and prototype part development.
No tool changes or complex fixturing reduces setup times by at least 50%
Standard Features
- Patented "Compute First-Move Later" motion control system including CAD/CAM software width online help.
- Precision X-Y Axis rigidly mounted to the cutting table
- Pre-loaded linear bearings and precision ball screws/
- Complete component protection against water, dirt, and grit.
- Rapid water level control for submerged cutting/
- Durable abrasive feed system with precision OMAX MAXJET® 5Nozzle
Assembly.
- Ultra-high pressure direct drive pump.
- Hard plumbing.
- Motorized Z-Axis.
AbarasiveJet Benefits
- Machines a wide range of materials and thickness.
- Does not create heat affected zones or mechanical stresses.
- Rapid setup, no tool changes are required.
- Minimal fixturing required.
- Leabes behina satin smooth edge, reducing secondary operations.
- No noxious gases, liquisds, or oils are used in (or caused by )the machining process.
- Completes most work below 80 dBA for submerged cutting.
Optional Accessories
- Tilt-A-Jet Cutting Head for taper free parts
- Precision Optical Locator
- Splash Shield Kit
- Solids Removal System (SRS)
- Water-only MAXJET 5 for cutting soft materials
- MAXJET 5 Minjet Nozzle Assembly
- Waterjet Brick for cutting thin materials
- 600 lb abrasibe delivery system
- Weir Tank
- Z-Axis Drill
- Manual Tilt Z
- Terrain Follower
Machine Dimensions: |
Footprint |
72" × 116" (1829 mm × 2946 mm) |
Weight (Tank Empty) |
520 lb (1600 kg) |
Height |
2" (2340 mm) |
Operating Weight (water in tank) |
7017 lb (3190 kg) (with water in tank) |
Work Envelope |
X-Y Travel |
29" × 25" (737 mm × 635 mm) |
Table Size |
46"× 31" (1168 mm × 787 mm) |
Computer Control System |
Hardware Windows® XP PC-based controller
Control Software Integrated CAD/CAM system directly uses .DXF files |
Positioning Accuracy |
Ball Bar Circularity (Over 12")
At Max. Traverse Velocity ±0.001" (±0.025 mm) |
Environmental Requirements |
Room air temperature 70°F (±2°) maintained for 24 hours prior to and during operation
Catcher tank water temperature 70°F (±1°) maintained through use of OMAX Catcher Tank Cooler
Machine table must be level and maintain level when jogging machine through the entire travel
No external mechanical or thermal load is allowed on any part of the machine table |
Speed |
90 inches per minute standard (2286 mm/min) |
Electrical Requirements |
3-Phase, 380-480 VAC ±10%, 50-60 Hz
(Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.) |
Pump Options |
3055V Pump Package Standard
(Note: You may require a chiller if your water temperature is in e×cess of 70°F.) |
Noise Level |
Below 80 dBA for submerged cutting |
- Note: Specifications subject to change without notice.
|
